Latest Nothing Flash Tool v2.12.02 Free 2025 Download. Click Here Nothing Flash Tool v2.12.02 Free 2025 Official Specification.
 |
| Nothing Flash Tool v2.12.02 Free Download |
Key Features of the Nothing Flash Tool:
Flash Firmware: Install stock firmware to upgrade the OS or fix software-related problems.
Readback Partition: Access a backup of the operating system for diagnostics and recovery.
Flash Partitions: Update specific partitions, such as the preloader or user data, for advanced customization.
Check Device Status: Retrieve information like SKU and bootloader status to ensure compatibility and readiness for flashing.
Compatibility
The Nothing Flash Tool has been tested and confirmed to work on the following devices:Nothing Phone 1Model: 20111VNothing Phone 2Model: 22111V
Nothing Phone 2AModel: 23111V
Nothing Phone 2A PlusModel: 23113V
CMF Phone 1Model: 23114V
How to use
Before proceeding, ensure you've backed up all important data, as the flashing process will erase all personal information on the device.Download the Nothing Flash Tool: Obtain the latest version from the official source and you can use the below link.
Install Necessary Drivers: Install the required drivers to ensure your device communicates properly with your computer.
Prepare the Firmware File: Download the appropriate firmware (.ntpi file) for your specific Nothing device model.
Move the .ntpi firmware file into the same folder as the Nothing Flash Tool executable to prevent errors like "Config Files Parsing Fail."
Launch the Nothing Flash Tool:Run the Nothing Flash Tool executable on your computer.
Connect Your Device: Power off your Nothing device.
Press and hold the Volume Up and Volume Down buttons simultaneously.
While holding the buttons, connect the device to your computer using a USB cable.
Release the buttons once the device is recognized by the tool.
Flash the Firmware:In the Nothing Flash Tool interface, select the connected device.
Click on the "Flash" button to begin the firmware installation process.
Wait for the process to complete; do not disconnect the device during flashing.
Reboot the Device:Once the flashing process is finished, the device will reboot automatically into the new firmware.