VIVO Y17s Preloader Scatter File Download
 |
| VIVO Y17s Preloader Scatter File Download |
Flashing VIVO Y17s Using SP Flash Tool
Download and Install Mediatek Driver AutoinstallerIf Mediatek Driver is already installed on your computer, skip this step.
Otherwise, download and install the driver.
Download Stock ROMDownload the Stock ROM (firmware) for your Mediatek Device.
Extract the downloaded firmware on your computer.
Download and Extract SP Flash ToolDownload SP Flash Tool and extract it on your computer.
You should see the following files after extraction:SP Flash Tool Extracted Files
⏬ Download VIVO Y17s Preloader Scattere Here ⏬
Launch SP Flash ToolOpen flash_tool.exe to launch the tool.
Load Scatter FileClick on the Scatter-Loading Button.
Locate and select the Scatter File from the firmware folder.
Click the Open button.
Start Flashing ProcessClick on the Download Button to begin the flashing process.
Connect Device to ComputerConnect your Mediatek Device to the computer using a USB cable (ensure the device is powered off).
After connecting, press the Volume Down or Volume Up key for the tool to detect the device.
Flashing ProcessOnce the computer detects your device, the flashing process will start automatically.
Removing FRP (Factory Reset Protection) on VIVO Y17s
Open SP Flash ToolLaunch the SP Flash Tool on your computer.
Load Scatter FileLoad the scatter file for your device.
Bypass the AuthBypass the authorization requirement.
Go to Format TabSelect the Format tab in SP Flash Tool.
Manual Format FlashChoose the "Manual Format Flash" option.
Set Format AddressesEnter the following addresses:
Begin Address [HEX]: 0x7508000
Format Length [HEX]: 0x100000
Start FormattingClick on the Start button to begin the formatting process.
Format Length [HEX]: 0x100000
Start FormattingClick on the Start button to begin the formatting process.
Download LINK File :: Mega LINK
